| [images/_private/include_header_mainspiral.htm] |
|
Price list DMX controller boards |
||
|
|
asershow Designer 2000 can control laser and theatrical
equipment using DMX512
control. Pangolin dealers may sell some of these
DMX-controlled devices, including lights, fog machines, mirrors,
and even DMX-controlled laser projectors.
If you are
interested in making your own DMX-controlled device or laser
projector, then you will need a DMX controller board. These boards
convert DMX signals into TTL
(on/off) or analog voltages. They also may use relays to control
larger voltages, such as activating 110 VAC or 220 VAC devices.
The list below
describes DMX controller boards that may have special features for
laser applications. If you know of any other DMX controller boards
to add to this list, please write to webmaster@pangolin.com.
| Safety note: DMX devices made specifically for laser applications should go to zero (shutter closed, device off) if the DMX signal is lost. Generic, non-laser devices may not have this safety feature; check the manufacturer's specifications for details. |
DMX controller boards available through Pangolin (or our dealers)
Logic Systems DMX1602A-DRV DMX decoder/driver board, $510 + shipping
This card set combines the features of decoding
18 DMX512 signals and supplying 18 high current analog
driver outputs. This system was specifically designed
for Laser Entertainment Accessories.
The DMX1602A-DRV has 16 individual 500ma current
controlled analog drivers with "Gain, Damping, and
Offset" controls. It also features 2 individual 500ma
high current, 0-10VDC analog voltage drivers. All
drivers are internally thermally protected and current
limited.
The board is
manufactured and warranted by Logic
Systems Inc.
Download the DMX1602A-DRV manual in .pdf
format
Logic Systems DMX1602 DMX decoder board, $120 + shipping
The LD2000 system uses DMX512 signals to control external devices. If
your projector uses on-off signals instead of DMX, then you need this board.
The DMX1602 lets you decode
DMX512 control signals coming from the LD2000 system, and use these to
derive 16 digital (TTL) and two analog outputs.
The 16 digital outputs can either
be 5 VDC TTL compatible, or open collector transistors capable of up to 30
VDC at 0.1 amps. The two analog outputs are 0-10 VDC with individual
trimpots for gain. The digital and analog outputs each have their own output
connector.
The board requires the user to
supply a voltage of +12 VDC at 50 milliamps. If using the RLY-16 relay
interface below, the current requirement is 600 milliamps. The board is
manufactured and warranted by Logic
Systems Inc.
Download the DMX1602 and RLY16 manuals in .pdf format
Logic Systems DMX0602A-DRV DMX decoder/driver board, $275 + shipping
This laser accessory driver card combines the
features of decoding DMX512 signals, and supplying 8
high current analog driver outputs. This system was
specifically designed for Laser
Entertainment Accessories.
The DMX0602A-DRV has 6 individual 500ma current
controlled analog drivers with "Gain, Damping, and
Offset" controls. It also features 2 individual 500ma
high current drivers that are selectable for either PWM
or 0-10VDC. All drivers are internally thermally
protected and current limited. Wide operating range
15-24vdc or +/- 15-24vdc.
The board is manufactured and warranted by
Logic Systems Inc.
Download the DMX0602 manual in .pdf format
Logic Systems RLY16 relay interface board, $110 + shipping
This card works with the DMX1602 card, to provide power and isolation to
directly activate devices. For example, you could turn on and off devices
such as lights requiring 110 or 220 VAC.
The card has 16 individual relays
with isolated contacts, rated 5 amps at 250 VAC. All relay coils are 12 VDC
and have positive coil connections common.
By using the included
interconnect cable, the RLY16 plugs directly into the DMX1602 (above). It
can also be used as a standalone relay interface card. The board is
manufactured and warranted by Logic
Systems Inc.
Download the DMX1602 and RLY16 manuals in .pdf format
Logic Systems, Inc. DMX0800 Low Cost DMX DECODER, $100 + shipping
The DMX0800 was designed specifically as a low cost decoder board for the professional lightshow industry. The board is approximately 3 inches square. The board has an LED that indicates a DMX signal is present and a two pin Molex connector for an external indicator. Either may be used.
All PCB relay connections are via Molex connectors. If you don't want to supply your own mating connectors, we can supply a mating connector kit for $5 USD. This kit contains the power and DMX input connector and two relay output connectors with pins.
DMX signal and 24vdc supply inputs are via a single 10 pin ribbon cable connector to accommodate daisy chain style wiring. The board is manufactured and warranted by Logic Systems Inc.
Download the DMX0800 manual in .doc format
Other DMX controller boards
For control of ILDA
ISP laser projectors, we offer our PICPro board at $340.This board
is specifically designed to decode and control 16 TTL actuators,a
shutter, 3 color channels, 2 scan insertion devices, 2 directional
variable speed diffraction wheels, and a stepper motor
rotational device such as a Machida
grating. All are decoded according to the ILDA DMX
Channel definitions.
Contact:
Holo-Spectra, (818)
994-9577, Van Nuys CA
JPK 32-channel DMX receiver, $220USD
Ideal for ILDA ISP-DMX applications. Individually selectable 5V
or 10V outputs with up to 20mA current. Ribbon cable
connects/disconnects all 32 channels at once. Optional screw
terminal board. DMX signal indicator and full 512 channel
addressing. Compact size 165 x 67mm (6.50 x 2.64 inches).
Contact: JPK
Systems Limited, (+64) 21 672535, Auckland, New Zealand.
Distributor: Holo-Spectra,
(818)
994-9577, Van Nuys CA
JPK 8-channel DMX receiver, $115USD
DMX signal indicator and full 512 channel addressing. Outputs
on 9 way D-type connector. Compact size 101 x 46mm (3.98 x 1.81
inches).
Contact: JPK
Systems Limited, (+64) 21 672535, Auckland, New Zealand.
Distributor:
Holo-Spectra,
(818)
994-9577, Van Nuys CA
JPK 2-relay DMX receiver, $95USD
Programmable switching levels and up to 10A at 240Vac
switching. DMX signal indicator and full 512 channel addressing.
Compact size 92 x 46mm (3.62 x 1.81 inches).
Contact: JPK
Systems Limited, (+64) 21 672535, Auckland, New Zealand.
Distributor:
Holo-Spectra,
(818)
994-9577, Van Nuys CA
SKE DMX16-DO DMX decoder board, price unknown
The DMX16-DO digital DMX controller receives
DMX512 data and converts the data to 16 bits of discrete
open-collector (TTL) control. An on-board high-speed UART and
micro-controller ensure proper DMX512 protocol and a frame rate
set at 32 frames per second. Protection circuitry is employed to
make the DMX512 interface fault tolerant.
Dual DMX connectors
provide In and Thru so that additional units can be wired in
parallel. A programmable address switch selects up to 256 possible
DMX addresses. A serial interface communicates with PCs, modems,
and other peripheral devices.
Contact: Simon-Kaloi
Engineering, Ltd., (805) 777-1084.
This page last updated: Wednesday, May 05, 2004 06:02 PM
Tech Support
